Varnishing Cheyenne WY

Of all finishes available, none offers as much protection and durability with as little difficulty in application as wiping varnish.

With wiping varnish you can achieve a run-free, brush-mark-free, air-bubble-free and almost dust-free finish, which after several coats is very protective against moisture penetration, and resistant to scratches, heat and solvents. And you can do this with no more effort than wiping or brushing on the finish, and either leaving it, or wiping off some or all of the excess.

No other finish offers all of these great qualities. The only finish that competes is gel varnish, but it's messy to apply, and it can't be built up as fast on the wood without leaving brush marks. Wiping varnish is arguably the single best finish for most amateur woodworking projects.

What is Wiping Varnish?

Wiping varnish is simply common oil-based varnish (any type, including alkyd varnish, polyurethane varnish or spar varnish) that is thinned enough with mineral spirits (paint thinner) so it is easy to wipe on wood. You can easily make your own.

The name, which I created in 1990, and which has been adopted by most writers and teachers of wood finishing, makes sense because the purpose of thinning is to make the varnish easy to wipe.

You may already be using wiping varnish and not realize it because it isn't sold under that name (maybe because that would give away the simplicity of the finish). It's sold under many different brand names, and few indicate what the finish really is.

This is the problem with wiping varnish and the reason it isn't widely recognized as one of the best finishes for anyone not using a spray gun. Manufacturers obscure the true nature of the finish by their misleading, and sometimes outright deceptive, product labeling. They want you to think they are selling you something different and special.

In this article I will tell you about varnish, how wiping varnish came to be, how to make and identify wiping varnish and how to apply wiping varnish. I will also explain how wiping varnish differs from oil, and mixtures of oil and varnish. (See "Testing for Oil: Does It Get Hard?" on page 74.)

Each of these finishes is a type of varnish. You can thin any one of them with mineral spirits to make a wiping varnish. The wiping varnish will have the characteristics of the varnish you use.

What is Varnish?

Varnish is a very common finish that is appreciated for its terrific moisture, scratch, heat and solvent resistance. No matter how new you are to woodworking, you have probably used some type of varnish or oil-based paint, which is varnish with pigment added.

One way to identify varnish is by the thinner and clean-up solvent listed on the container. This is mineral spirits, which is usually identified by its more all-inclusive name, "petroleum distillate." The only other finishes that thin and clean up with mineral spirits are o...