Shellacking New York NY

Shellac is a very old finish, so it has an old measuring system based on the concept of "pound cut." One pound of shellac flakes dissolved in one gallon of alcohol equals a one-pound cut. Read more.

The Home Depot
(212)929-9571
40 West 23rd Street
New York, NY
The Home Depot
(718)278-9031
50-10 Northern Blvd
Long Island City, NY
The Home Depot
(718)230-0833
585 Dekalb Ave
Brooklyn, NY
The Home Depot
(201)521-9437
440 Route 440
Jersey City, NJ
The Home Depot
(201)271-1200
1055 Paterson Plank Rd
Secaucus, NJ
The Home Depot
(212)888-1512
980 3rd Ave
New York, NY
The Home Depot
(201)868-8125
7605 Tonnelle Avenue
North Bergen, NJ
The Home Depot
(201) 963-6859
180 12th St
Jersey City, NJ
The Home Depot
(201)963-6513
180 Twelfth Street
Jersey City, NJ
The Home Depot
(718)401-2520
600 Exterior Street
Bronx, NY

Shellacking

The Case for Shellac

February 06, 2007
by  Bob Flexner

Today, shellac is the most under-appreciated of all finishes, but this hasn’t always been the case. Until the 1920s, when lacquer was introduced, shellac was the primary finish used in furniture factories and small woodworking shops. It continued to be the favored finish of professionals finishing interior wood trim and floors, and of hobbyists finishing everything, including furniture, until the 1950s and 60s.

Then polyurethane and “wiping” varnish (varnish thinned about half with paint thinner and often mislabeled “tung oil”) were introduced and widely promoted. Beginning in the 1970s, blends of linseed oil and varnish, like Watco Danish Oil, were promoted in magazines for their ease of use.

Instead of defending shellac during this period, suppliers retreated to the position that shellac was a good sealer for stains and knots. They also allowed shellac to get an exaggerated reputation for weak water resistance, and they increased its stated “shelf life” from one year to three years. (Shellac slowly deteriorates after it’s dissolved in alcohol. After about a year it no longer hardens well enough or is water-resistant enough to be used as a complete finish on most furniture and cabinet surfaces. Always use shellac within a year of when it was dissolved.)

Now shellac is rarely used as a finish except by high-end antique refinishers (which ought to tell you something). This is terribly unfortunate, because shellac still is one of the best finish choices for most woodworking and refinishing projects.

What is Shellac?
Shellac is a natural resin secreted by insects called lac bugs, which attach themselves to certain trees native to India and Southeast Asia. Suppliers buy the resin and sell it as flakes, or dissolve it in alcohol and package the solution in cans for you to purchase.

Natural shellac is orange (amber) in color and is your best choice when you want to add warmth to wood. Most old furniture and woodwork was finished with orange shellac. Bleached shellac (sold as “white” or “clear”) is best when you want to maintain the whiteness of a pickling stain or the natural color of light woods such as maple, birch and poplar. You can mix orange and bleached shellac to achieve an in-between color.

Natural shellac contains about 5 percent wax and will produce excellent results; but dewaxed shellac, whether pre-dissolved or in flake form, is more water-resistant. You can remove wax from regular shellac by letting it settle and then decanting the liquid.

Shellac is a very old finish, so it has an old measuring system based on the concept of “pound cut.” One pound of shellac flakes dissolved in one gallon of alcohol equals a one-pound cut. Two pounds in one gallon is a two-pound cut; one pound in a quart is a four-pound cut; and so on.

The shellac you buy at the paint store is almost always a three-pound cut, which is very thick for brushing or sp...

Click here to read the rest of this article from Popular Woodworking Magazine